20W powerful two way radio ZASTONE L2000
- IntroductionL2000 specification: APO( Auto power off): APO will automactically turn off the radio after a set length of inactivity,. This function should be programmed by software. APO interval can be set to 10 minutes, 20 minutes, 30 minutes, 40 minutes, 50 minutes, 60 minutes, 90 minutes, 2 hours, 4 hours, 6 hours, 8 hours, 10 hours, 12 hours, 14 hours, or 16 hours.
Scan: Press a key which programmed as Scan, would enable scanning feature.
TOT( Time out Timer)
Opening Tone: Enable opening tone through software, the radio would beep when radio turn on. Default: ON.
Panel key settings:
The P1, P2( On the left side of radio) and P3(on the top of the radio) keys are user programmable. The three programmable keys can only be changed in the programming software.
Each of these keys has two programmable functions, accessed by a short press(press and release) or a long press ( Press and hold for 1.5seconds). Each of these functions is set in one of the programmable key menus.
You may set any of the programmable keys to perform the following functions: OFF/ MOLO/ SQM/ Scan /Scan Add/ TX power / VOX/ Fan.
Programming software password:
A password can be set through the programming software to the radio. Once a password programmed to the radio, the radio can only be programmed when the password correct input in the software.
When lease feature enable through programming software, the radio flash the RED light when the time is out. You can do nothing except turn the radio off. It can only recover working through software.
UHF or VHF
400~480MHz or 136~174MHz
5W/ 10W/ 25W
Radio Body *1
Dual Antenna *1
English Manual *1